Garbage Truck
( 4 Votes )

We produce in our İzmir factory, in accordance with TSEK quality norms, depending on vehicle chassis capacity refuse wagons with capacities; 6+1, 7+1, 11+1.5, 13+1.5, 15+1.5, 18+1.5, 20+1.5 m3. The refuse box is hydraulic pressed and produced to be rear loaded, suitable for loading 150 - 400 - 800 liters containers with 35 seconds press time, 35 - 40 seconds discharge period and 1/3 - 1/6 press ratio.

The hydraulic material used in the production of refuse boxes is wholly imported and the operation system is completely automatic.


Specifications / Modell
7+1 m3
13+1.5 m3
15+1.5 m3
Box width
1915 mm
2400 mm
2400 mm
Box dimensions
3200x1800x1400 mm
3860x1700x2250 mm
4310x2250x1900 mm
Box volume
7+1 m3
13+1.5 m3
15+1.5 m3
Hydraulic cylinder
9 Units
9 Units
9 Units
ox weight
245 kg
4550 kg
5800 kg
Main pressure
160 kg / cm2
190 kg / cm2
190 kg / cm2
Telescopic discharge (forw)
150 kg / cm2
175 kg / cm2
175 kg / cm2
Telescopic discharge (rear)
160 kg / cm2
175 kg / cm2
175 kg / cm2
Rear down
80 kg / cm2
80 kg / cm2
80 kg / cm2
Rear up
160 kg / cm2
190 kg / cm2
190 kg / cm2
Automatic loading time
20 - 30 sn.
30 - 40 sn.
30 - 40 sn.
Hydraulic oil tank capacity
90 lt.
120 lt.
120 lt.
Pump out cycle
800 d/d
1000 d/d
1000 d/d
Suction strainers
125 u
125 u
125 u
Return filter
25 u
25 u
25 u
...................................................................................................................................

 

 STYLE 1

STYLE 2
 

blank blank blank

info : Hydrolic Ladder

Hydraulic ladder reaching 26 meters, hydraulic balancing system and balancing feet are provided to the vehicles. 
All the hydraulic system is produced of important material as the basis in the hydraulic ladders and balancing system. There is a basket with a carrying capacity of 200 Kg load at the end of the hydraulic ladder and water is transported up the ladder. The basket is balanced electronically.

info : Ladder Box

The bodies of the trucks are produced with the highest quality of implementation and design in three pieces of a modular system. The water tanks of the fire trucks are produced with ST 37 steel plate or chromium nickel rust proof plate with a volume depending on the capacity of the vehicle. Styrofoam tanks with a volume nearly 10% of the water tanks are standard implementation.

info : Rescue Parts

As an option, fire trucks can be designed and build both as fire trucks and emergency aid and rescue trucks. All kinds of rescue equipment (cutting and separating scissors, aid beds, jump beds, fresh air cylinders and masks, generators, motor pumps, crushing or drilling guns, clothes to approach fire and helmets, absorbtion and pressure hoses, etc) are provided to the trucks upon option.
RocketTheme Joomla Templates